Vehicles
93 not categorized PORSCHE 924 S REAR SEALCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.FPOR0216 B&b exhaust muffler right side exit w/ wastegate pipe Porsche 930 turbo 75-89 General Fitment930 1975-77
$1,640.68
Make a selection FVD111046 Is your exhaust tip a little old and unappealing to look at? Update it with a more aggressive look. Made from t304 stainless steel with a polished finish. 4 round to fill in the entire bumper cut out. Angle cut to complement the rear bumper. Sold individually. 1 necessary per car.
$162.80
Make a selection FVD11199300 Are your exhaust tips a little old and unappealing to look at? Update them with a more aggressive look. Made by dansk, from t304 stainless steel with a polished finish. 4.75 long x 3.35 high (120x85mm) to fill in the entire bumper cut out. Angle cut to complement the rear bumper. If you would like to update your exhaust tip clamps and hardware, please order the following: 2 qty. 92811124605 2 qty. 92811142700 4 qty. 90007425202 4 qty. FVD116929 2 qty. 99908405202 General Fitment911 1994-98
From $326.70
Make a selection FVD33150030 This kit is complete and includes a total of 8, 4 smaller and 4 larger for the rear control arms. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 8. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.
$746.90
Make a selection FVD545964000 This rear window is a high-quality lightweight replacement that is designed to perform like the original. It is a replacement for original number, 964 545 107 04. Features: 10 % lighter than original (weighs approx. 6 kg (13.2 lbs)) uses the original seal, part # 96454522500 clean appearance - does not include a cut out rear windshield wiper does not include a rear window defroster grid (less wiring / weight) green tinted, curved design like the original made in Germany please note: be sure to check the model fitment tab to ensure this works on your car.
$744.70
Make a selection FVD341999R Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with our FVD clubsport series. They are made from rubber with a 85 shore hardness value which is the same as the rennsport models. 85 shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This is the ideal upgrade for street and light track / clubsport use. This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes 85 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$124.30
Make a selection FVD631404 Don't let cracked or faded lenses detract from your cars appearance. Replace them with these high-quality OEM replacements, designed to perform like the originals. The red lenses were genuine equipment on usa models, but they really clean up the rear when added in place of the amber look. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold as a set. 1 necessary per car.
$119.90
Make a selection FVD58099100 German manufactured bolt in harness bar solution that is less obtrusive than a full roll bar. This harness bar is secured to the rear strut towers with the included high-grade fasteners. Features: seamlessly secured to the rear strut towers allows full front seat range of motion ideal for a lease or to return to the original equipment does not require trimming or cutting any interior parts discreet single belt tube airbag and belt tensioner system remain fully operational chromoly steel tig welded black finish factory seat belts or 4-5-6-point belts can be used. Cost effective for club sport use. Please note: this requires the removal of the rear seat back rests.
$764.50
Make a selection FVD51299122MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,844.70
Make a selection FVD51299605 Unfortunatly for the us, the GT3rs was never brought overseas. This is your chance to have the rear spoiler from the rs that many consider a work of art . No longer will your GT3 be mistaken for a 996 with an aero kit, the carbon fiber wing blade really makes the car stand out! Kit includes: rear decklid (with ram air), and carbon fiber wing blade General Fitment911 1998-05
From $3,704.70
Make a selection M500065 Moton club sport damper system Porsche 944 turbo 85-94 General Fitment944 1985-88
$7,356.15
Make a selection M500040 Moton club sport damper system track Porsche 996 98-05 General Fitment911 1998-05
$8,166.15
Make a selection FVD3419991 This is a cost effective alternative to buying new control arms. Replace worn-out original soft rubber (65 shore hardness value) control arm bushings with new bushings of the same rubber (65 shore hardness value). This bushing set is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65 shore hardness value cores. This is a front and rear bushing for the front lower control arm (wishbone). 2 sets are necessary per car.
$124.30
Make a selection M500052 Moton club sport damper system Porsche Boxster incl s 97+ General FitmentBOXSTER 1997-04
$7,761.15
Make a selection M500129 The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you. General Fitment911 2005-08
$8,166.15
Make a selection MIS2000 Great inexpensive way to convert your four lug wheel bolt pattern to the five lug 911 style so you can add six inch five lug wheels. General Fitment914 1970-76
$1,152.26
Make a selection MIT1416 Embossed rear GT spoiler with Porsche on it, easily installed and painted, this one really works to give you down force at high speeds
$269.00
Make a selection MIT1409 Our front and rear stock fiberglass bumpers incorporate both the face bar and rubber top seal into one piece, facilitating installation and saving hundreds over the originals. please keep in mind that fiberglass does not provide the crash protection of steel, but saves weight for autocross and track events! For bumper with oil cooler cut out, use b91450590100. General Fitment914 1970-76
$395.00
Make a selection P70170050040 Speedart fuses performance innovation with attractive aesthetics. Speedart constantly looks for ways to improve upon Porsche vehicles. Speedart attains their goal of fusing performance and aesthetics with the best materials available. After the exhaustive research and development process, speedart manufactures its components with great precision ensuring the highest quality possible. Speedart realizes that their customers expect outstanding quality and will only accept the best when it comes to customizing their Porsche. General FitmentPANAMERA 2010-14
$4,455.00
Make a selection P70170050050 Speedart fuses performance innovation with attractive aesthetics. Speedart constantly looks for ways to improve upon Porsche vehicles. Speedart attains their goal of fusing performance and aesthetics with the best materials available. After the exhaustive research and development process, speedart manufactures its components with great precision ensuring the highest quality possible. Speedart realizes that their customers expect outstanding quality and will only accept the best when it comes to customizing their Porsche. General FitmentPANAMERA 2010-14
$3,442.50
Make a selection P70170050070 Speedart fuses performance innovation with attractive aesthetics. Speedart constantly looks for ways to improve upon Porsche vehicles. Speedart attains their goal of fusing performance and aesthetics with the best materials available. After the exhaustive research and development process, speedart manufactures its components with great precision ensuring the highest quality possible. Speedart realizes that their customers expect outstanding quality and will only accept the best when it comes to customizing their Porsche. General FitmentPANAMERA 2010-14
$3,047.63
Make a selection P97HSATURCF Speedart carbon rear wing blade Porsche 997 turbo General Fitment911 TURBO/GT2 2007-09
$3,865.04
Make a selection RSF986B Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well. General FitmentBOXSTER 1997-04
$1,892.23
Make a selection RBGF993C Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well. General Fitment911 1994-98
$2,587.57
Make a selection ZP9142 Achieve the look of the 911 rear lens between the tail lights and play fill in the void with this highly reflective lens. Made exclusively for the 914 and originally installed as a dealer option. General Fitment914 1970-76
$275.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |